Cheat sheets
From ZENotes
(Difference between revisions)
(→channels) |
|||
| Line 3: | Line 3: | ||
=Pronto:= | =Pronto:= | ||
| − | == | + | ==Channels== |
*Set channel 1 manually: '''[1], Level Wheel''' | *Set channel 1 manually: '''[1], Level Wheel''' | ||
*Set 1 at 50%: '''[1],[CHannel],[50],[@_level]''' | *Set 1 at 50%: '''[1],[CHannel],[50],[@_level]''' | ||
| Line 12: | Line 12: | ||
*Bòackout: '''[C/ALT]+[CHannel]''' | *Bòackout: '''[C/ALT]+[CHannel]''' | ||
| − | == | + | ==Presets:== |
| − | record a preset: '''[1][RECORD],[modify]''' | + | *record a preset: '''[1],[RECORD],[modify]''' |
| + | *Crossfade to preset 1: '''[1],[GOTO]''' | ||
| + | *Load preset 2 in B register: '''[2], [PRESET]+[B]''' | ||
| − | + | * If you are in preset 0, then preset 1 is loaded to B register, just hit '''[GO]'''; you can interrupt with [PAUSE], restart with [GO] | |
| + | * '''[GO BACK]''' button goes back in 2 seconds | ||
| + | *Bòackout: '''[0]+[GOTO]''' | ||
| + | |||
| + | ==Masters== | ||
| + | * Set Preset to a master: '''[1], [PRESET]+[master button 1]''' | ||
==various trouble:== | ==various trouble:== | ||
* always make sure console is not in direct channel, set '''direct channel switch''' to '''''off''''' | * always make sure console is not in direct channel, set '''direct channel switch''' to '''''off''''' | ||
| + | * check Blackout led, must be Off. | ||
| + | * Crossfade manual faders must be completely '''down''' to allow next crossfade to take place by moving from down to up. | ||
Revision as of 07:34, 12 December 2011
Contents |
Ardour
The Ardour Cheat Sheet is here: http://ardour.org/node/2894
Pronto:
Channels
- Set channel 1 manually: [1], Level Wheel
- Set 1 at 50%: [1],[CHannel],[50],[@_level]
- 2+3 at 50: [2],[CH],[3],[+],[50],[@_LEVEL]
- Set 5>9@50: [5],[CH],[9],[THRU],[@_LEVEL]
- The [ALL] key select all channels with a level
- Bòackout: [C/ALT]+[CHannel]
Presets:
- record a preset: [1],[RECORD],[modify]
- Crossfade to preset 1: [1],[GOTO]
- Load preset 2 in B register: [2], [PRESET]+[B]
- If you are in preset 0, then preset 1 is loaded to B register, just hit [GO]; you can interrupt with [PAUSE], restart with [GO]
- [GO BACK] button goes back in 2 seconds
- Bòackout: [0]+[GOTO]
Masters
- Set Preset to a master: [1], [PRESET]+[master button 1]
various trouble:
- always make sure console is not in direct channel, set direct channel switch to off
- check Blackout led, must be Off.
- Crossfade manual faders must be completely down to allow next crossfade to take place by moving from down to up.
