Cheat sheets
From ZENotes
Contents |
Ardour
The Ardour Cheat Sheet is here: http://ardour.org/node/2894
Pronto:
- Pronto Setup is in, well, [SETUP]
- get help with [?]+[any key you don't know about]
- Menus are accessed with [DownArrow] or [C/ALT]+[DownArrowe]]; Select with [MODIFY];
Channels
- Set channel 1 manually: [1], Level Wheel
- Set 1 at 50%: [1],[CHannel],[50],[@_level]
- Set 1 at full: [1], [C/ALT]+[+%]
- 2+3 at 50: [2],[CH],[3],[+],[50],[@_LEVEL]
- Set 5>9@50: [5],[CH],[9],[THRU],[@_LEVEL]
- The [ALL] key select all channels with a level
- Bòackout: [C/ALT]+[CHannel]
Presets:
- record a preset: [1],[RECORD],[modify]
- Crossfade to preset 1: [1],[GOTO]
- Load preset 2 in B register: [2], [PRESET]+[B]
- Bring up the list of presets: [PRESET]
- Blind editing a preset: [1], [PRESET]
- If you are in preset 0, then preset 1 is loaded to B register, just hit [GO]; you can interrupt with [PAUSE], restart with [GO]
- [GO BACK] button goes back in 2 seconds.
- Bòackout: [0]+[GOTO]
Masters
- Set Preset to a master: [1], [PRESET]+[master button 1]
various trouble:
- [FREEZE] switch upper right does just that, freeze the output.
- always make sure console is not in direct channel, set direct channel switch to off
- check Blackout led, must be Off.
- Crossfade manual faders must be completely down to allow next crossfade to take place by moving from down to up.