Revision as of 09:30, 12 December 2011 (view source) Admin (Talk | contribs) (→Channels) ← Older edit		Latest revision as of 10:13, 13 December 2011 (view source) Admin (Talk | contribs) (→Channels)
(3 intermediate revisions by one user not shown)
Line 18:		Line 18:
	*The '''[ALL]''' key select all channels with a level		*The '''[ALL]''' key select all channels with a level
−	*Bòackout: '''[C/ALT]+[CHannel]'''	+	*Blackout: '''[C/ALT]+[CHannel]'''
−	*'''[MODIFY]+[CHannel]''' brings editor of channel parameters, so '''[1], [MODIFY]+[CHannle]''' will allow to modify parameters of Channel 1.	+	*'''[MODIFY]+[CHannel]''' brings editor of channel parameters, so '''[1], [MODIFY]+[CHannel]''' will allow to modify parameters of Channel 1.
		+
		+	* Set a channel time, say 2 secs: '''Select channel, then [2], [TIME]+[CHannel]
	All and everything about channels is page 120		All and everything about channels is page 120
	==Presets:==		==Presets:==
		+
		+	I probably need to ask '''FollowOn''' mode
		+
	*record a preset: '''[1],[RECORD],[modify]'''		*record a preset: '''[1],[RECORD],[modify]'''
	*Crossfade to preset 1: '''[1],[GOTO]'''		*Crossfade to preset 1: '''[1],[GOTO]'''
	*Load preset 2 in B register: '''[2], [PRESET]+[B]'''		*Load preset 2 in B register: '''[2], [PRESET]+[B]'''
−	* edit esquence of preset:  put preset 5 after 1: '''[1],[SEQ]''' then '''[insert]'''	+
		+	* Edit sequence 1: '''[1], [SEQ]''', '''[RECORD]''' will overwrite, '''[2],[RECORD]''' will save it as 2.
		+	* edit sequence of presets:  put preset 5 after 1: '''[1],[SEQ]''' then '''[insert]'''
		+	* Load a Sequence to a Crossfade Playback '''[1], [SEQ] + [PLAYBACK]'''
		+
		+
		+	* Modify times: '''[MODIFY]+[TIME]''' opens the time window
	* Load, work, arrange sequences of presets in '''[MENU],<PLAY>''' and '''[MENU],<PLAYLIST>'''.		* Load, work, arrange sequences of presets in '''[MENU],<PLAY>''' and '''[MENU],<PLAYLIST>'''.
−	* Also, '''hold down''' 2 secs '''[A], [B], [C] or [D]''' to access it and edit	+	* Also, '''hold down''' 2 secs '''[A], [B], [C] or [D]''' to access it and edit, or hold '''[PLAYBACK] 2 seconds'''.
	* Bring up the list of presets: '''[PRESET]'''		* Bring up the list of presets: '''[PRESET]'''
Line 39:		Line 50:
	* '''[GO BACK]''' button goes back in 2 seconds.		* '''[GO BACK]''' button goes back in 2 seconds.
	*Blackout: '''[0]+[GOTO]'''		*Blackout: '''[0]+[GOTO]'''
		+
		+	All everything about presets is on page 178
		+	Sequences, so order of presets and their time/delays, are on 198
	==Masters==		==Masters==
	* Set Preset to a master:  '''[1], [PRESET]+[master button 1]'''		* Set Preset to a master:  '''[1], [PRESET]+[master button 1]'''
−	-+ Modofy a subgroup: '''[MODIFY]+[MasterButton]''' or '''Hold Down [MasterButton] 2 secs	+	* Modify a subgroup: '''[MODIFY]+[MasterButton]''' or '''Hold Down [MasterButton] 2 secs
		+	* Set time to a master, say 2 secs: '''[2],[TIME]+[MasterButton]'''
	==various trouble:==		==various trouble:==

---

Latest revision as of 10:13, 13 December 2011

Contents 1 Ardour 2 Pronto: 2.1 Channels 2.2 Presets: 2.3 Masters 2.4 various trouble:

Ardour

The Ardour Cheat Sheet is here: http://ardour.org/node/2894

Pronto:

• Pronto Setup is in, well, [SETUP]
• get help with [?]+[any key you don't know about]
• Menus are accessed with [DownArrow] or [C/ALT]+[DownArrowe] or [UpArrow]; Select with [MODIFY];
• Patch is in [Menu],<Pronto>,<Channels>. See <channel curves> and <channels layout> too.
• Save/Load are in [Menu],<Files>
• Scroll in windows, menus by holding down any [ArrowKey] and moving the [LevelWheel]

Channels

• Set channel 1 manually: [1], Level Wheel
• Set 1 at 50%: [1],[CHannel],[50],[@_level]
• Set 1 at full: [1], [C/ALT]+[+%]
• 2+3 at 50: [2],[CH],[3],[+],[50],[@_LEVEL]
• Set 5>9@50: [5],[CH],[9],[THRU],[@_LEVEL]

• The [ALL] key select all channels with a level
• Blackout: [C/ALT]+[CHannel]
• [MODIFY]+[CHannel] brings editor of channel parameters, so [1], [MODIFY]+[CHannel] will allow to modify parameters of Channel 1.

• Set a channel time, say 2 secs: Select channel, then [2], [TIME]+[CHannel]

All and everything about channels is page 120

Presets:

I probably need to ask FollowOn mode

• record a preset: [1],[RECORD],[modify]
• Crossfade to preset 1: [1],[GOTO]
• Load preset 2 in B register: [2], [PRESET]+[B]

• Edit sequence 1: [1], [SEQ], [RECORD] will overwrite, [2],[RECORD] will save it as 2.
• edit sequence of presets: put preset 5 after 1: [1],[SEQ] then [insert]
• Load a Sequence to a Crossfade Playback [1], [SEQ] + [PLAYBACK]

• Modify times: [MODIFY]+[TIME] opens the time window

• Load, work, arrange sequences of presets in [MENU],<PLAY> and [MENU],<PLAYLIST>.
• Also, hold down 2 secs [A], [B], [C] or [D] to access it and edit, or hold [PLAYBACK] 2 seconds.

• Bring up the list of presets: [PRESET]
• Blind editing a preset: [1], [PRESET]

• If you are in preset 0, then preset 1 is loaded to B register, just hit [GO]; you can interrupt with [PAUSE], restart with [GO]

• [GO BACK] button goes back in 2 seconds.
• Blackout: [0]+[GOTO]

All everything about presets is on page 178 Sequences, so order of presets and their time/delays, are on 198

Masters

• Set Preset to a master: [1], [PRESET]+[master button 1]
• Modify a subgroup: [MODIFY]+[MasterButton] or Hold Down [MasterButton] 2 secs
• Set time to a master, say 2 secs: [2],[TIME]+[MasterButton]

various trouble:

• [FREEZE] switch upper right does just that, freeze the output.
• always make sure console is not in direct channel, set direct channel switch to off
• check Blackout led, must be Off.
• Crossfade manual faders must be completely down to allow next crossfade to take place by moving from down to up.

Paste = C/Alt & INSERT
Copy = C/Alt & DELETE
Cut = Make a COPY followed by a DELETE