Cheat sheets
From ZENotes
(Difference between revisions)
(→Presets:) |
|||
| Line 5: | Line 5: | ||
* Pronto Setup is in, well, '''[SETUP]''' | * Pronto Setup is in, well, '''[SETUP]''' | ||
* get help with '''[?]+[any key you don't know about]''' | * get help with '''[?]+[any key you don't know about]''' | ||
| − | * Menus are accessed with '''[DownArrow]''' or '''[C/ALT]+[DownArrowe]'''; Select with '''[MODIFY]'''; | + | * Menus are accessed with '''[DownArrow]''' or '''[C/ALT]+[DownArrowe]''' or '''[UpArrow]'''; Select with '''[MODIFY]'''; |
* Patch is in '''[Menu],<Pronto>,<Channels>'''. See <channel curves> and <channels layout> too. | * Patch is in '''[Menu],<Pronto>,<Channels>'''. See <channel curves> and <channels layout> too. | ||
* Save/Load are in '''[Menu],<Files>''' | * Save/Load are in '''[Menu],<Files>''' | ||
| + | * Scroll in windows, menus by holding down any '''[ArrowKey] and moving the [LevelWheel]''' | ||
==Channels== | ==Channels== | ||
| Line 18: | Line 19: | ||
*The '''[ALL]''' key select all channels with a level | *The '''[ALL]''' key select all channels with a level | ||
*Bòackout: '''[C/ALT]+[CHannel]''' | *Bòackout: '''[C/ALT]+[CHannel]''' | ||
| + | *'''[MODIFY]+[CHannel]''' brings editor of channel parameters, so '''[1], [MODIFY]+[CHannle]''' will allow to modify parameters of Channel 1. | ||
==Presets:== | ==Presets:== | ||
| Line 23: | Line 25: | ||
*Crossfade to preset 1: '''[1],[GOTO]''' | *Crossfade to preset 1: '''[1],[GOTO]''' | ||
*Load preset 2 in B register: '''[2], [PRESET]+[B]''' | *Load preset 2 in B register: '''[2], [PRESET]+[B]''' | ||
| + | * edit esquence of preset: put preset 5 after 1: '''[1],[SEQ]''' then '''[insert]''' | ||
* Load, work, arrange sequences of presets in '''[MENU],<PLAY>''' and '''[MENU],<PLAYLIST>'''. | * Load, work, arrange sequences of presets in '''[MENU],<PLAY>''' and '''[MENU],<PLAYLIST>'''. | ||
| Line 33: | Line 36: | ||
* '''[GO BACK]''' button goes back in 2 seconds. | * '''[GO BACK]''' button goes back in 2 seconds. | ||
| − | * | + | *Blackout: '''[0]+[GOTO]''' |
==Masters== | ==Masters== | ||
| Line 44: | Line 47: | ||
* check Blackout led, must be Off. | * check Blackout led, must be Off. | ||
* Crossfade manual faders must be completely '''down''' to allow next crossfade to take place by moving from down to up. | * Crossfade manual faders must be completely '''down''' to allow next crossfade to take place by moving from down to up. | ||
| + | |||
| + | Paste = C/Alt & INSERT | ||
| + | Copy = C/Alt & DELETE | ||
| + | Cut = Make a COPY followed by a DELETE | ||
Revision as of 08:52, 12 December 2011
Contents |
Ardour
The Ardour Cheat Sheet is here: http://ardour.org/node/2894
Pronto:
- Pronto Setup is in, well, [SETUP]
- get help with [?]+[any key you don't know about]
- Menus are accessed with [DownArrow] or [C/ALT]+[DownArrowe] or [UpArrow]; Select with [MODIFY];
- Patch is in [Menu],<Pronto>,<Channels>. See <channel curves> and <channels layout> too.
- Save/Load are in [Menu],<Files>
- Scroll in windows, menus by holding down any [ArrowKey] and moving the [LevelWheel]
Channels
- Set channel 1 manually: [1], Level Wheel
- Set 1 at 50%: [1],[CHannel],[50],[@_level]
- Set 1 at full: [1], [C/ALT]+[+%]
- 2+3 at 50: [2],[CH],[3],[+],[50],[@_LEVEL]
- Set 5>9@50: [5],[CH],[9],[THRU],[@_LEVEL]
- The [ALL] key select all channels with a level
- Bòackout: [C/ALT]+[CHannel]
- [MODIFY]+[CHannel] brings editor of channel parameters, so [1], [MODIFY]+[CHannle] will allow to modify parameters of Channel 1.
Presets:
- record a preset: [1],[RECORD],[modify]
- Crossfade to preset 1: [1],[GOTO]
- Load preset 2 in B register: [2], [PRESET]+[B]
- edit esquence of preset: put preset 5 after 1: [1],[SEQ] then [insert]
- Load, work, arrange sequences of presets in [MENU],<PLAY> and [MENU],<PLAYLIST>.
- Also, hold down 2 secs [A], [B], [C] or [D] to access it and edit
- Bring up the list of presets: [PRESET]
- Blind editing a preset: [1], [PRESET]
- If you are in preset 0, then preset 1 is loaded to B register, just hit [GO]; you can interrupt with [PAUSE], restart with [GO]
- [GO BACK] button goes back in 2 seconds.
- Blackout: [0]+[GOTO]
Masters
- Set Preset to a master: [1], [PRESET]+[master button 1]
-+ Modofy a subgroup: [MODIFY]+[MasterButton] or Hold Down [MasterButton] 2 secs
various trouble:
- [FREEZE] switch upper right does just that, freeze the output.
- always make sure console is not in direct channel, set direct channel switch to off
- check Blackout led, must be Off.
- Crossfade manual faders must be completely down to allow next crossfade to take place by moving from down to up.
Paste = C/Alt & INSERT Copy = C/Alt & DELETE Cut = Make a COPY followed by a DELETE
