View source

=Ardour=
The Ardour Cheat Sheet is here: http://ardour.org/node/2894

=Pronto:=
* Pronto Setup is in, well, '''[SETUP]'''
* get help with '''[?]+[any key you don't know about]'''
* Menus are accessed with '''[DownArrow]''' or '''[C/ALT]+[DownArrowe]''' or '''[UpArrow]'''; Select with '''[MODIFY]'''; 
* Patch is in '''[Menu],<Pronto>,<Channels>'''. See <channel curves> and <channels layout> too.
* Save/Load are in '''[Menu],<Files>'''
* Scroll in windows, menus by holding down any '''[ArrowKey] and moving the [LevelWheel]'''

==Channels==
*Set channel 1 manually: '''[1], Level Wheel'''
*Set 1 at 50%: '''[1],[CHannel],[50],[@_level]'''
*Set 1 at full: '''[1], [C/ALT]+[+%]'''
*2+3 at 50: '''[2],[CH],[3],[+],[50],[@_LEVEL]
*Set 5>9@50:  '''[5],[CH],[9],[THRU],[@_LEVEL]'''

*The '''[ALL]''' key select all channels with a level
*Blackout: '''[C/ALT]+[CHannel]'''
*'''[MODIFY]+[CHannel]''' brings editor of channel parameters, so '''[1], [MODIFY]+[CHannel]''' will allow to modify parameters of Channel 1.

* Set a channel time, say 2 secs: '''Select channel, then [2], [TIME]+[CHannel]

All and everything about channels is page 120

==Presets:==

I probably need to ask '''FollowOn''' mode

*record a preset: '''[1],[RECORD],[modify]'''
*Crossfade to preset 1: '''[1],[GOTO]'''
*Load preset 2 in B register: '''[2], [PRESET]+[B]'''

* Edit sequence 1: '''[1], [SEQ]''', '''[RECORD]''' will overwrite, '''[2],[RECORD]''' will save it as 2.
* edit sequence of presets:  put preset 5 after 1: '''[1],[SEQ]''' then '''[insert]'''
* Load a Sequence to a Crossfade Playback '''[1], [SEQ] + [PLAYBACK]'''


* Modify times: '''[MODIFY]+[TIME]''' opens the time window

* Load, work, arrange sequences of presets in '''[MENU],<PLAY>''' and '''[MENU],<PLAYLIST>'''.
* Also, '''hold down''' 2 secs '''[A], [B], [C] or [D]''' to access it and edit, or hold '''[PLAYBACK] 2 seconds'''.

* Bring up the list of presets: '''[PRESET]'''
* Blind editing a preset: '''[1], [PRESET]'''

* If you are in preset 0, then preset 1 is loaded to B register, just hit '''[GO]'''; you can interrupt with [PAUSE], restart with [GO]

* '''[GO BACK]''' button goes back in 2 seconds.
*Blackout: '''[0]+[GOTO]'''

All everything about presets is on page 178
Sequences, so order of presets and their time/delays, are on 198

==Masters==
* Set Preset to a master:  '''[1], [PRESET]+[master button 1]'''
* Modify a subgroup: '''[MODIFY]+[MasterButton]''' or '''Hold Down [MasterButton] 2 secs
* Set time to a master, say 2 secs: '''[2],[TIME]+[MasterButton]'''

==various trouble:==
* '''[FREEZE]''' switch upper right does just that, freeze the output.
* always make sure console is not in direct channel, set '''direct channel switch''' to '''''off'''''
* check Blackout led, must be Off.
* Crossfade manual faders must be completely '''down''' to allow next crossfade to take place by moving from down to up.

 Paste = C/Alt & INSERT
 Copy = C/Alt & DELETE
 Cut = Make a COPY followed by a DELETE